TOSS Pneumatic Linear Ball Slides designed to actuate or carry loads to a predetermined destination; or provide pressing, pushing, pulling or stamping power; this robust, air actuated, accurately guided, ball slide is superior in its durability and reliability. TOSS Pnuematic Linear Ball Slide Designed and built in Germany /TOSS GmbH & Co. KG
Designed and built in Germany /TOSS GmbH & Co. KG

All Products —
Double/Single Acting Pnuematic Linear Ball Slide
Single/Double Acting
Opposite Acting Pnuematic Linear Ball Slide
Opposite Acting
Adjustable Units Pnuematic Linear Ball Slide
Adjustable Units
Other Types Pnuematic Linear Ball Slide
Other Types

PNEUMATIC LINEAR BALL SLIDES

DESCRIPTION
Designed to actuate or carry loads to a predetermined destination; or provide pressing, pushing, pulling or stamping power; this robust, air actuated, accurately guided, ball slide is superior in its durability and reliability. Driven by an internal double acting air cylinder(s) that advance and retract the upper mounting block on ball bearings; this unit will move or carry heavy top loaded or cantilevered loads.

BENEFITS
No need to design a combination of cylinders and guiding means to actuate mechanical devices. TOSS pre-engineered and proven Pneumatic Ball Slides do it all with minimal design and assembly effort. This means dollar savings and much less design time and effort.

ADVANTAGES
Save both time and cost by using a preengineered solution with perfect performance from this compact unit.

OPERATION and SIZES
The Ball-Slides operate with clean dry air at up to 90 psig, cylinder bores range from 8mm to 40 mm, producing forces of up to 175 lbs. Stroke lengths of 0.40” up to 7.87” are available as standard in the “B” Model. Other models, larger sizes and longer strokes, are also available.

STRUCTURE
The non-magnetic, aluminum body minimizes weight while hardened and ground steel guides assure precision and longevity. Brass lined cylinders are complimented by chrome plated steel piston rods. “O” ring seals are Buna N unless otherwise requested. Contact TOSS with a description of your application and get assistance in making your selection of bore size and stroke.

MOUNTING
Convenient threaded mounting holes on top, bottom, and the active end facilitate mounting vertically, horizontally, or in any required attitude.

INSTALLATION DIMENSIONS, FORCE, and TORQUE CALCULATIONS
can be found in our Technical Information Section. Contact Toss Pneumatics for further assistance.

Pneumaitc Ball Slide technical info

Toss Machine Components, Inc.
539 South Main Street
Nazareth, PA 18064 USA
Phone: 610-759-8883
Fax: 610-759-1766
Email us at:
info@tossballslides.com

"Save time and cost with
TOSS Technology"


TOSS Technology precision impulse heat sealing controls and components
Visit TOSSHeatSeal.com

Validatable Heat Seal Machines
Visit PackWorldUSA.com

Call 610-759-8883
Visit TossFormers.com

TOSS Impulse Heat Seal Controls
Visit ImagineSustainability.com
©2019 Toss Machine Components, Inc. | 539 South Main Street | Nazareth, PA 18064 USA
Phone: 610-759-8883 | Fax: 610-759-1766
Email us at: info@tossballslides.com

WebMaster ComoLtd.